In general, you don’t need planning permission for a garden building to house a hot tub, depending on its size and location. You will not need to seek planning permission as long as the proposed building is single story, not over 3 meters tall (or 4 meters including pitched roof), and not within 2 meters of your boundary.
Hot Tub Installation Process
Installing a hot tub is simple. You need a solid, level base, a power outlet, and a hose pipe to fill it. If sinking the spa, consider access to the component door for servicing. Get full installation instructions from your supplier. Most hot tubs are very heavy and easily damaged, so use plenty of help and dollies when moving one.
Do I need a permit for a hot tub in Florida? Spa and hot tub permits may have slightly different requirements. You do not need a permit in Florida if your spa is self-contained and requires no electrical or plumbing work.
You only need a building permit for a pool, spa, hot tub, or other body of water that has a capacity of greater than 5,000 gallons. Unless you’re getting a king-size hot tub, this won’t apply to you and your backyard jacuzzi.
Additional Info on Permits and Regulations
However, there is a catch. While standard tubs are typically fine, custom tubs installed in single-family residences may require electrical or plumbing permits.
The Florida Department of Health can be reached at 850-487-0864 or [email protected]. Their mailing address is: 4052 Bald Cypress Way, Bin A-08, Tallahassee, FL 32399.
The Notice of Commencement is filed with the Lake County Clerk’s Office for any job value exceeding $2,500. The office is located at 550 W Main Street, Tavares, FL 32778. The county has a satellite office for drop-offs located at 902 Avenida Central, The Villages 352-753-2064.
You need to adhere to plumbing and electrical codes. An electrician should check your electrical source. A plumber should ensure water supply lines are code compliant.