Sprinkler Head Installation
- Top of Sprinkler Head
- The top of a sprinkler head should be flush with the ground, not sticking up into the grass.
- In some cases, they need to be at or below the surface level, and in others, the head can be up to three-quarters of an inch above ground level.
- The depth of the sprinkler head depends on the type of turf grass and underground pipes used.
Sprinkler Head Maintenance
- Replacing Sprinkler Heads
- On average, it costs $2 to $90 per sprinkler head to replace.
- A stuck sprinkler head is commonly caused by dirt and debris caught between the body and riser, stopping the riser from sliding back down.
Sprinkler System Planning
- Sprinkler Head Spacing
- To determine sprinkler head spacing, measure the yard’s length/width.
- Divide the sprinkler’s maximum spray distance in half to determine spacing.
- Flushing the sprinkler head grounds should be done periodically to make sure the system is working properly and that the water pressure is correct.
Drilling Down on Sprinkler Head Depths
- Ideal Head Depth
- Sprinkler head depth should vary depending on the sprinkler system, but in general they should be installed at least two to six inches below the soil surface.
- The depth of the sprinkler head should be appropriate for the type of turf grass used in the landscape and the type of underground pipes used in the irrigation system.
Other Considerations
- System Cost
- It costs between $2 and $12 per sprinkler head should you choose to replace them yourself.
- Adding additional sprinkler heads is between $94 and $103 while replacing or relocating every sprinkler head on your lawn is around $400.
Please note that the detailed descriptions and repetition have been removed to enhance clarity and conciseness. Let me know if you need further assistance!