How Do You Hand Start a John Deere B?

by

Starting Procedures for John Deere Tractors

  1. Sit in the driver’s seat.
  2. Make sure the transmission is in neutral.
  3. Insert the ignition key and turn it to the "on" position.
  4. Wait for the dash lights to come on.
  5. Pull the choke if the engine is warm.
  6. Hold the brake pedal, move the throttle lever to the "Start" position, and turn the key to start the tractor.

Starting a John Deere Riding Mower

  1. Sit on the seat and ensure the parking brake is set.
  2. Insert the key and turn it to start the engine.
  3. Pull out the choke if necessary.
  4. Allow the engine to warm up, then lower the mower deck.
  5. Push the blade lever to engage the cutting blades.

Stopping a John Deere Riding Mower

  1. Move the throttle to idle.
  2. Disengage the mower deck lever.
  3. Set the parking brake.
  4. Turn the ignition key to stop the engine.
  5. Remove the key when not in use.

Leave a Comment